Administrator; System Management; Upload Firmware; Settings Management - TRENDnet TEW-800MB User Manual

TRENDnet User's Guide

Administrator

System Management

You can configure the administrator password. The device URL (host name) can be
entered in place of the IP address you choose and the default is
or http://tew-800mb/ , to access this device.

Upload Firmware

Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it for firmware upgrade.
Click Apply. If prompted, click Yes or OK to start the firmware upgrading process.
© Copyright 2013 TRENDnet. All Rights Reserved.

Settings Management

You can save system settings by exporting them, as a backup, to a configuration file;
restore them by importing the file, or reset them to factory default.
http://192.168.10.110
Export Settings
This option allows you to export and then save the media bridge's configuration to a file
on your computer as a backup. Be sure to save the configuration before performing a
firmware upgrade.
Import Settings
Use this option to restore previously saved media bridge configuration settings.
Load Factory Defaults
This option restores all configuration settings back to the settings that were in effect at
the time the media bridge was shipped from the factory. Any settings that have not
been saved will be lost. If you want to save your media bridge configuration settings,
use the Export Settings option above.
System Reboot
This restarts the media bridge. It is useful for restarting when you are not near the
device.
TEW-800MB
14