TRENDnet User's Guide
6. Wait for the media bridge to restore settings.
Reboot your media bridge
Administrator > Settings Management
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your media bridge.
• Turn the media bridge off for 10 seconds using the media bridge On/Off switch
(EU version only) located on the rear panel of your media bridge or disconnecting
the power port, see
"Product Hardware
Use this method if you are encountering difficulties with accessing your media
bridge management page. This is also known as a hard reboot or power cycle.
OR
• Media bridge, Settings Management Page – This is also known as a soft reboot
or restart.
1. Log into your router management page (see
2. Click on Administrator and click on Settings Management.
3. Under System Reboot section, click Reboot.
© Copyright 2013 TRENDnet. All Rights Reserved.
Features" on page 5.
"Installation and
Login" on page 6).
TEW-800MB
21