Self-Diagnosis Display/Warning Indicators - Sony DEV-50 Handbook

"PlayMemories Home" does not work
correctly.
Quit "PlayMemories Home" and restart your

computer.
This product is not recognized by the
computer.
Disconnect devices from the USB jack of the

computer other than the keyboard, mouse,
and this product.
Disconnect the micro USB cable from the

computer and this product, and restart the
computer, then connect the computer and this
product again in the correct order.
Self-diagnosis display/
Warning indicators
If indicators appear on the screen, check the
following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C: (or E:) : (Self-diagnosis display)
C:04: 
The battery pack is not an "InfoLITHIUM"

battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 80).
Connect the DC plug of the AC Adaptor to the

DC IN jack of this product securely (p. 12).
C:06: 
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
C:13:  / C:32: 
Remove the power source. Reconnect it and

operate this product again.
E:  : 
Follow the steps from  on page 65.

 (Battery level warning)
The battery pack is nearly used up.

Depending on the operating environment or

battery conditions,  may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
GB
0