Sony DEV-50 Handbook page 16

If you see the image below, the device

works correctly.
If you see the image below even after

adjusting the viewfinder, cease using this
product.
The horizontal line and the vertical lines do not
overlap.
The horizontal line is extremely tilted.
If you cannot see images correctly, this
product may be damaged. Contact
your Sony dealer or local authorized
Sony service facility.
7
Select [Run].
If you select [Run Later], the recording

mode screen appears. When you turn on
this product next time, the [Auto 3D Lens
Adjust] screen will appear.
8
Adjust the 3D lens.
Aim this product at a subject to display
it on the screen.
View a subject for which the scale of the

indicator exceeds the
select
Scale
Do not change the subject until the

adjustment is completed.

Notes
If this product fails to perform [Auto 3D Lens

Adjust], select [Run Again].
Type of subjects that should be
displayed on the screen for [Auto 3D
Lens Adjust]
The scale indicated varies depending on the
subject displayed on the screen.
Subjects that indicate a higher scale:
Distant subjects in bright places such as

outdoors
Subjects farther away than 20 m (65 ft.) from

this product
Subjects with various colors and shapes

Subjects that indicate a lower scale and
result in adjustment failure:
Subjects in night scenes and in dark places

Subjects within 20 m (65 ft.) from this

product
Subjects with few patterns and shapes

Subjects that repeat the same pattern, such as

rows of windows on buildings
Moving subjects

GB
1
mark, and then

.