Playback - Sony DEV-50 Handbook

This product stops operating.
If you keep applying vibration on this product,

recording may stop.
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
On this product, there may be a slight time

delay between the point where you press
START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
The auto focus does not function.
Set [Focus] to [Auto] (p. 49).

The recording conditions are not suitable for

auto focus. Adjust the focus manually (p. 49).
SteadyShot does not function.
Set [ SteadyShot] to [Active] or [Standard]

(p. 53), [ SteadyShot] to [On] (p. 53).
Even if [ SteadyShot] is set to [Active] or

[Standard], [ SteadyShot] to [On], this
product may not be able to compensate for
excessive vibrations.
You may not recognize the effect when you use

the large magnification.
The subjects passing by the screen very
fast appear crooked.
This is called the focal plane phenomenon.

This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
Horizontal stripes appear on the images.
This occurs when recording images under a

fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
Sound is not recorded correctly.
If you disconnect an external microphone, etc.

during recording movies, sound may not be
recorded correctly.
Connect the microphone again in the same

way as when you start recording movies.

Playback

Images cannot be played back.
Images recorded on other devices may not be

played back. This is not a malfunction.
When [2D/3D Mode Select] is set to [3D],

movies recorded with 2D cannot be played
back.
Photos cannot be played back.
Photos cannot be played back if you have

modified files or folders, or have edited the
data on a computer. (The file name flashes in
that case.) This is not a malfunction.
You cannot play back photos when [2D/3D

Mode Select] is set to [3D]. Select [2D] to play
back photos (p. 56).
is indicated on a thumbnail.
This may appear on an image recorded on

other devices, edited on a computer, etc.
You removed the AC Adaptor or the battery

pack while the memory card icon at the top
right corner of the screen flashes, or before
the access lamp is turned off after recording.
This may damage your image data and
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.

Check the data base file by selecting
(MENU)  [Setup]  [
 [Repair Img. DB F.]. If it still appears,
delete the image with
GB

is
Media Settings]
(p. 32).