Sony DEV-50 Handbook page 61

USB LUN Setting
Improves compatibility with external
devices by limiting the functions of the USB
connection.
 Multi
Use this setting for ordinary operations.
Single
Try this setting only if you cannot connect to
an external device.
VF Brightness
You can adjust the brightness of the
viewfinder in five steps.
Viewfinder Adjust
Adjust the relative vertical position of the
right and left viewfinder to allow you to
view 3D images comfortably.
Move the horizontal line to overlap the
vertical lines by selecting
select when these lines overlap (p. 15).
The viewfinder adjustment dialog may
appear automatically depending on the
status of this product.

Notes
Use [Viewfinder Adjust] in the following cases.

When you feel uncomfortable viewing images

in 3D
When the user of this product changes

When strong physical shock has been applied

to this product
When you use this product under extremely

hot or cold conditions
When the vertical and horizontal lines will not

overlap or the horizontal line is extremely tilted,
stop using this product and contact your Sony
dealer or local authorized Sony service facility.
GPS Information
(DEV-50V)
This product can display location
information.
How to check the triangulating
information
Color of the satellites/
triangulating gauge
/ , and
If your current location information
cannot be triangulated
This product starts the triangulating
priority mode. As this product turns
other functions off to search for satellites,
obtaining GPS information can take
priority.
Select [Update] to receive location
information manually.
GB
1
Satellite icons
Triangulating Information for the
gauge location
Status
No signal, but orbit
/ (black)
information for the
satellite is available.
33 % of the satellite orbit
/ (gray)
information has been
obtained.
66 % of the satellite orbit
/ (brown)
information has been
obtained.
99 % of the satellite orbit
/ (ocher)
information has been
obtained.
Triangulating is completed
/ (green)
and the satellite is
currently being used.