Using Composite Video (Good) - Insignia NS-55D440NA14 User Manual

Insignia 55" LED TV

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
Composite Analog audio
video cable
connector connectors
Composite Analog
video jack audio jacks
To connect a cable or satellite box using composite video:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the AV IN Y/VIDEO jack and L/R AUDIO jacks on the back of your TV and
to the composite video and audio out jacks on the cable or satellite box.
Notes
• The COMPONENT IN Y/VIDEO, P
• When you connect the audio using the L/R AUDIO jacks, the audio
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Component/AV, then press ENTER.
AV IN Y/VIDEO jack.
cable
a component device) share the L/R AUDIO jacks with the AV IN
Y/VIDEO jack (used to connect a composite device).
output is analog.
www.insigniaproducts.com
(composite video
Back of TV
, and P video jacks (used to connect
B R
Cable or
satellite box
AV cable
cable)
16