Installing a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See "Miscellaneous" on page 76.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the stand is attached, remove the four screws that secure the stand column to the TV, then remove the stand.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Notes
• VESA wall-mount measurements are 15.75 × 15.75" (400 × 400 mm)
• The length of the wall-mount screws vary depending on the wall-mount
• The mounting holes on the back of your TV take type M6 screws.
7
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
www.insigniaproducts.com
Wall-mount holes
Wall-mount holes
NS-55D440NA14 Insignia 55" LED TV