Using Analog Audio - Insignia NS-55D440NA14 User Manual

Using analog audio

When you connect a home theater using the AUDIO OUT/
On your TV
3.5mm audio
cable connector
AUDIO/ OUT
jack
To connect a home theater system using analog audio:
1 Make sure that your TV's power cord is unplugged and the home theater system is turned off.
2 Connect a 3.5mm audio cable (not provided) to the AUDIO OUT/
AUDIO IN jacks on the analog home theater system.
3 Plug your TV's power cord into a power outlet, then turn on your TV and the home theater system.
Notes
• For information about selecting the audio out mode for a home theater,
• You can connect headphones, an amplifier, a home theater system, or a
33
Home theater system
3.5mm audio
see the Headphone/Audio Out option in
page 44.
sound bar to the AUDIO OUT/
you need to disconnect the amplifier, home theater system, or sound
bar.
www.insigniaproducts.com
jack, the TV speakers are muted.
Side of TV
cable
"Adjusting sound
jack. If you want to use headphones,
NS-55D440NA14 Insignia 55" LED TV
jack on the side of your TV and to the
settings" on