Table of Contents
Advertisement
Zoom
displays the camera image in double size. Press
Zoom
the image not displayed on the LCD screen. Press
NIGHt LIGHt
You can control the UBR223 night light using the
monitor or the camera. However, if you want to control it from the monitor, you must place that
camera in full screen mode.
1. To turn the night light on from the monitor, place the night light camera in full screen mode.
2. Press
NIGHt LIGHt
and a night light icon displays on the monitor.
3. Press
NIGHt LIGHt
LuLLaBIes
Your system comes with four preprogrammed lullabies. You can control the lullabies from either
the monitor or the camera. However, if you want to control them from the monitor, the camera you
want to play them through must be in full screen mode.
When you press
LuLLaBY PLaY/stoP
repeat until you press
The Lullaby feature can also play all lullabies one after the other. Press
the Lullaby system and begin playing Lullaby #1. Press
begins playing. Lullaby #1 restarts and then cycles through the rest of the lullabies.
1. To control the lullabies from the monitor, decide which camera you want to play lullabies and
make it the full screen live view camera.
2. Press
LuLLaBY PLaY/stoP
3. Press
LuLLaBY sKIP
28
sPeCIaL Features
on the side of the monitor or the camera. The camera's night light turns on
again to turn it off.
to turn on the lullaby feature, Lullaby #1 begins playing. It will
to move to the next lullaby.
LuLLaBY sKIP
on the monitor or camera. The system plays Lullaby #1 then repeats it.
to skip to Lullaby #2. The system plays Lullaby #2 then repeats it.
,
▲Vol
▼Vol, CH►,
again to return to normal view.
Zoom
button on the right side of either the
NIGHt LIGHt
four (4) times after Lullaby #1
LuLLaBY sKIP
or
to see the parts of
CH◄
to turn on
LuLLaBY PLaY/stoP
Advertisement
Table of Contents
