Frigidaire FFHB2740PE Use And Care Manual page 35

Replacing LED Lights
The fresh food compartments of your
refrigerator may have LED lights. Always use
Frigidaire parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator's power cord.
2 Remove lens cover.
3 Remove LED board.
4 Replace LED board and snap in place
assuring the light is facing in toward the
unit (inside fresh food).
5 Replace lens cover.
Lens Removal
LED Light Board Removal

NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.
(select models)
CARE & CLEANING
Replacing Light Bulbs
CAUTION
Wear gloves when replacing incandescent
light bulbs to avoid getting cut.
1 Unplug your refrigerator's power cord.
2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an
appliance bulb of the same type and
wattage (normally 40 watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator's power cord.
Light
Bulb
Refigerator
Light Cover
Refrigerator Light
Light
Bulb
Freezer
Light Cover
Freezer Light
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online
at www.frigidaire.com/store, or through the
dealer where you bought the refrigerator. Here is
the product number to request when ordering:
LED Light, Part #242196201
Incandescent Lights (40-watt bulb),
Part #5305514148
(select models)
Light Sockets
Located Behind
Glass Shelves
Light
Bulb
Light Socket
Located in Upper
Freezer Section
Light
Bulb
35