Connecting To A Wireless Lan (Sold Separately); Mounting A Wireless Lan Unit - NEC NP-PH1400U User Manual

Connecting to a Wireless LAN (sold separately)

The separately sold wireless LAN unit allows you to use a wireless LAN environment. When using the projector in a
wireless LAN environment, the IP address and other settings must be made on the projector.
Important:
• If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is
prohibited, remove the USB Wireless LAN Unit from the projector.
• Buy the appropriate USB Wireless LAN Unit for your country or area.
NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working.
• Your computer's wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard.
Flow of Setting Wireless LAN
Step 1:
Attach the USB Wireless LAN Unit to the projector. (→ page 179)
Step 2:
Display [NETWORK SETTINGS] from [APPLICATION MENU]. (→ page 146)
Step 3:
Select [NETWORK SETTINGS] → [WIRELESS LAN] → [PROFILES] and set [EASY CONNECTION],
[PROFILE 1], or [PROFILE 2]. (→ page 147)
TIP:
Access the HTTP server function to set [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS] → [EASY CONNECTION], [PRO-
FILE1], [PROFILE2].

Mounting a wireless LAN unit

NOTE:
• The wireless LAN unit has a front and a back and must be mounted in the wireless LAN port in a specific direction. The port is
designed so that the unit cannot be mounted in the opposite direction, but trying to push it in by force could damage the wireless
LAN unit port.
• To prevent damage due to static electricity, touch a nearby metal object (a door knob, aluminum sash, etc.) before touching the
wireless LAN unit to eliminate the static electricity from your body.
• Turn off the main power before mounting and removing the wireless LAN unit.
Mounting and removing the wireless LAN unit while the projector's power is on could damage the wireless LAN unit or result in
malfunction on the projector. If the projector should malfunction, turn off the projector's power, turn off the main power switch,
and unplug the power cord, then plug the power cord back in.
• Do not connect any USB device other than the wireless LAN unit to the USB (LAN) port. Also, do not connect the wireless LAN
unit to the USB port in the connector section.
6. Installation and Connections
178