Setup | Security - Optoma EPHD131Xe User Manual

SETUP | Security

Pass-code default
™
value is "1234" (first
time).
Enter Current Security Code (4 digits)
Incorrect security code. Re-enter again. (Last Try)
Security
On: Choose "On" to use security verification when the turning
`
on the projector.
Off: Choose "Off" to be able to switch on the projector without
`
password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the
number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again.
Change Password
First time:
`
1. Press " " to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new password
and then press "
Change Password:
`
(If your remote does not have a number keypad, please use
the up/down arrows to change each digit of the password,
then press enter to confirm)
1. Press " " to input old password.
2. Use number button to enter current password and then press "
" to confirm.
3. Enter new password (4 digits in length) using the number but-
tons on the remote, then press "
4. Enter new password again and press "
If the incorrect password is entered 3 times, the projector will
`
automatically shut down.
If you have forgotten your password, please contact your local
`
office for support.
User Controls
Security
Security Timer
Change Password
" key to confirm your password.
" to confirm.
SETUP
Security
Off
Exit
" to confirm.
47
English