Display | 3D - Optoma EPHD131Xe User Manual

DISPLAY | 3D

"3D sync. Invert" func-
™
tion wouldn't save the
setting. It will set to
"Off" when powers on
and changes source.
3D Format is only sup-
™
ported on 3D Timing
on page 61.
"3D Format" is only
™
supported on non-
HDMI 1.4a 3D timing.
3D Mode
DLP-Link: Select "DLP-Link" to use optimized settings for DLP
`
Link 3D Glasses. (refer to page 17).
VESA 3D: Select "VESA 3D" to use optimized setting for VESA
`
3D Glasses. (refer to page 17).
3D -> 2D
3D: Display 3D signal.
`
L (Left): Display the left frame of 3D content.
`
R (Right): Display the right frame of 3D content.
`
3D Format
Off: Press the "Off" to disable 3D format conversion.
`
SBS: Display 3D signal in "Side-by-Side" format.
`
Top and Bottom: Display 3D signal in "Top and Bottom" format.
`
Frame Sequential: Display 3D signal in "Frame Sequential"
`
format.
3D Sync. Invert
Press the "On" to invert left and right frame contents.
`
Press the "Off" for default frame contents.
`
User Controls
DISPLAY
3D Mode
3D -> 2D
3D Format
3D Sync. Invert
3D
DLP - Link
3D
AUTO
Off
Exit
43
English