Akai PDP42Z5TA - 42" Plasma TV User Manual page 4

Hold the power connector when removing the power cable:
Pulling the power cable itself may damage the wires inside
the cable and cause fire or electric shock.
Do not touch the connector with wet hands:
To avoid risk of electric shock.
Insert batteries in accordance with instructions:
Insert the batteries with correct polarities (positive
negative ).
Incorrect polarities may cause breakage and leakage of
the batteries, hurt operators and contaminate the remote
controller.
Do not block or cover the vents:
Blocking the vents may cause overheating and fire. Do not
install the product in a place with little or no ventilation.
Never cover the vents with towels, blankets or dusters.
Unplug the connector:
Unplug the power connector when the product will not be
used for a long time.
Image Sticking:
The plasma monitor illuminates phosphor to display images. The phosphor has a
finite illumination life. After extended periods of illumination, the brightness of the
phosphor will be degraded to such extend that stationary images would burn-in
that part of the screen as grayed-out images.
Tips to prevent such image sticking are:
- Do not display static images of high contrast and high brightness for long
periods. Use of video games and computers on this product may promote burn
in of images on the screen. Many portions of video game play and computer
desktops do not refresh and will contribute to this problem.
- Do not leave stationary images appearing for long, but try to refresh them at
appropriate intervals of time, or try to move them using screen saver function.
- Turn down the contrast and brightness control.
Note:
Such "Image Sticking" constitute misuse are NOT COVERED by the manufacturer's
warranty.
4
ATTENTION
and
Unplug the connector
Unplug the connector