Akai PDP42Z5TA - 42" Plasma TV User Manual page 13

Display: Press to display the channel
information; this information
disappears after 9 seconds.
V-Chip: Select the child protect
mode you want.
0~9 Number Buttons: Press 0~9
to select a channel, and used to
input the password; the channel
changes after 4 seconds.
Freeze: Press to freeze the picture,
press again to restore the picture.
DTV/TV: Press to choose DTV/TV
(high definition channels) directly.
Guide (Digital TV Timetable):
Press to display the (Digital TV
Timetable) mode. Press again
to exit.
DOT: Press number buttons with it to
select the channels directly in DTV.
(i.e. channel 108-1 would need
the dot button after the 8)
Recall: Press to return to previous
channel.
Source: Press to select the signal
source, such as TV, AV, S-Video,
YPbPr 1, YPbPr 2, VGA, HDMI 1
or HDMI 2. If you are selecting
inputs from the OSD menu or
the input menu, press the Enter button to confirm your source selection.
Enter: Press to enter or confirm.
VOL +/-: Press to adjust the volume.
CH +/- : Press to select the channel forward or backward.
, , , : Press ,
Menu: Press to enter into the on-screen setup menu, press again to exit.
These buttons have no function.
Exit: Press this button to exit in the menu.
Favorite: Press to display the favorite channel list. Press
select the channel then press Enter to confirm.
Add/Erase: Press to add or delete favorite or dislike channels.
Pic Size: Press to change the screen size, such as Full, 4:3.
(Note: When in VGA mode, it can only select "Full".)
Zoom: Press repeatedly to zoom the image.
Red: This is a special control function for the Digital tuner.
Green: This is a special control function for the Digital tuner.
Blue: This is a special control function for the Digital tuner.
Yellow: This is a special control function for the Digital tuner.
, , to move the on-screen cursor.
or to
13