Basic Operation; Power On/Off - Akai PDP42Z5TA - 42" Plasma TV User Manual

The Initial Setup menu will read "Complete"
after the scanning is finished.
Press the Enter button to exit.
Note: Initial setup is for the TV stations only.
If you don't select "Scan" to start the scanning in the initial setup menu
"Channel Scan", the process will repeat itself the next time you turn on
your television.
If you would like to end the scanning process, press the Exit button to exit.
If you would like to scan for stations again, select "Channel Scan" in the
TV menu.

6. Basic Operation

6.1 Power ON/OFF: The Display
is in Standby mode
- Press Standby ( ) button on the remote
control or on the front panel to turn on the unit.
The power indicator changes from red to
green.
- Press Standby ( ) button on the remote
control or on the front panel again to return
the display to standby mode. The power
indicator changes from green to red.
Standby
Display
Source
21