Remote Control - Akai PDP42Z5TA - 42" Plasma TV User Manual

. ANT IN: 75Ω Coaxial connector for Antenna/Cable Network.
. S-Video INPUT: Connects to the S-Video out jack of your VCR or other
video equipment that has S-Video.
S-Video Audio Input: Connects the audio input terminal to the audio
output terminal of the S-Video output device.
. AUDIO OUTPUT: Connects audio amplifier or other device with that
audio input.
. Coaxial: This terminal is used as a digital audio output to an external
amplifier. This output produced 2 channels of digital audio.
. Speaker OUTPUT: Can be used to connect external speakers with 6Ω
impedance to the product. Rated audio output power 10W + 10W.
. AC INLET: Connect the power cable to the product then connect the main
plug to the wall outlet.

4.3 Remote Control

(Note: Details refer to AKAI TV Universal Remote Control Programming Guide.)
Standby( ): Press to turn on and
off.
Mute( ): Press this button to quiet
the sound. Press again to
reactivate the sound.
Press these buttons to select
control of the TV, DVD, VCR or
Set-top Box device.
P. Mode: Press to cycle
through picture modes: Cinema,
Normal, Vivid, Hi-Bright and User.
S. Mode: Press to cycle through
the sound modes: Normal, News,
Cinema, Concert and User.
Sleep: Press repeatedly until it
displays the time in minutes (10,
20, 30, 40, 50, 60, 90, 120 and Off)
that you want the TV to remain on
before shutting off. To cancel sleep
time, press Sleep button repeatedly
until sleep Off appears.
F1: Press to cycle through the
Stereo and Multi-channel TV
sound options: Mono, Stereo and
Bilingual.
CCD: Press to select the Closed
Caption mode.
12
(Continued on next page)