HP XT905UT Maintenance And Service Manual page 86

4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
Remove the processor:
1. Position the computer right-side up, with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE:
on the processor slot when you install the processor.
Reverse this procedure to install the processor.
78 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Fan (see Fan on page 73)
Heat sink (see Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
47).
65)
71)
75)