Table of Contents
Advertisement
To remove the display assembly in its entirety:
1.
Disconnect the display panel cable (1) from the system board.
2.
Release the wireless antenna cables from the clips (2) built into the base enclosure.
CAUTION:
support the display assembly can result in damage to the display assembly and other
computer components.
3.
Remove the five Phillips PM2.5×6.0 screws (1) that secure the display assembly to the
computer.
74
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to
Hide quick links:
Advertisement
Table of Contents
