Table of Contents
Advertisement
●
System board (see
●
Fan/heat sink assembly (see
To remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
2.
Lift the processor (3) straight up, and then remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
94
Chapter 4 Removal and replacement procedures
System board on page
The gold triangle (4) on the processor must be aligned with the triangle icon embossed
82)
Fan/heat sink assembly on page
87)
Hide quick links:
Advertisement
Table of Contents
