To Turn On The Computer - HP OmniBook XE2-DE - Notebook PC Setup Manual

CAUTION
NOTE
Hint
Your built-in modem may not work with multiple phone lines or a private branch
exchange (PBX), cannot be connected to a coin-operated telephone, and does not
work with party lines. Some of these connections may result in excess electrical
voltage and could cause a malfunction in the internal modem. Check your
telephone line type prior to connecting your phone line.
The OmniBook modem supports the v.23 standard required for connecting to the
MiniTel system in France. To connect to the MiniTel system, use MiniTel emulation
software available in France.

To turn on the computer

Press the blue power button above the keyboard. Windows starts automatically. If you
are turning on the computer for the first time, go to "To set up Windows" on page 18.
The power status light (see "Status lights" on page 14) reports the following:
Steady green light: computer is on.
Slow blinking: computer is in System Standby or Suspend mode.
No light: computer is off or in Hibernate mode.
See "Managing Power Consumption" on page 38 for additional information about
turning off your computer.
If your computer does not turn on when operating on battery power, the battery may be
out of power. Plug in the AC adapter and press the blue power button again.
Introducing the OmniBook PC
Setting Up the Computer
Setup Guide 17