Memory Problems; Pointing Device And Mouse Problems - HP OmniBook 5500 - Notebook PC User Manual

Make sure you have not disabled IrDA support on your OmniBook.
If the parallel printer doesn't print
Check that you're using a standard parallel printer cable.
If you can print from another application, check the current application. The
application itself may be at fault.
If the printer stops when you turn off the OmniBook
If the ac adapter is connected, don't turn off the OmniBook until the job is
finished printing. When you turn off the OmniBook while the ac adapter is
connected, it sends a reset signal to the printer. (If you're not using the ac
adapter, no reset signal is sent.)
If the left edge of printed output is missing
If the printer you're using is a 600-dpi (dots per inch) printer, try selecting a
compatible printer driver for a 300-dpi printer. For example, for a 600-dpi
HP LaserJet printer, try using the HP LaserJet IIIsi driver (300-dpi). Certain
applications may not work properly with 600-dpi printers.

Memory Problems

If a message says you're out of memory
To find out how much memory is in your OmniBook, see
software and memory size."
Exit Windows, then type win to restart Windows. If this doesn't fix the problem,
exit Windows and

Pointing Device and Mouse Problems

If the cursor is difficult to control
You can adjust the cursor movement in the Mouse Properties box.
1. Go to Program Manager.
2. From the Main group, double-click Control Panel.
3. Double-click the Mouse icon to open the Mouse Properties box.
4. Drag the slider to adjust the mouse tracking speed, then click OK.
reboot the OmniBook.
79
"To find the system