To Make Dos 6.22 And Windows For Workgroups Backup Disks; To Recover Hp Software Programs - HP OmniBook 5500 - Notebook PC User Manual

Select all defaults for this installation. Do not install any printers or networks.
Install them after the rest of this installation is complete.
11. Insert the Recovery CD in the CD-ROM drive.
12. Insert the Support Utility disk in the floppy disk drive.
13. Press the reset button.
The DOS 6.22 Startup menu appears.
14. Choose option 3:
Recover Windows for Workgroups drivers and HP Application Software
15. Choose the type of CD-ROM drive you're using: internal OmniBook, SCSI with
docking system, or PCMCIA or parallel port.
Do not interrupt the recovery process or unplug the ac adapter until recovery is
completed.

To make DOS 6.22 and Windows for Workgroups backup disks

When you set up the Windows for Workgroups operating system, you should have
been prompted to create a set of backup disks for Windows for Workgroups and
DOS 6.22. If you did not make backup disks, you can do so now with the following
procedure.
From the OmniBook group, double-click Make Backup Installation Disks.
Follow the instructions on the screen.

To recover HP software programs

1. If you have an internal CD-ROM drive, install it in the OmniBook.
–or–
If you have a SCSI CD-ROM drive and a docking system, connect the SCSI
CD-ROM drive to the docking system.
–or–
If you have a PCMCIA or parallel port CD-ROM drive, connect the PCMCIA or
parallel port CD-ROM drive. See
drive."
2. Insert the Recovery CD in the CD-ROM drive.
3. From the \omnibook\hputils\disk1 directory on the CD, double-click
setup.exe.
The OmniBook Application Software Setup menu appears.
"To set up a PCMCIA or parallel port CD-ROM
33