2.1.2. DELL HARDWARE ARCHITECTURE
The prerequisites for Dell UPS Local Node Manager installation are described in the "Dell UPS Local
Node Manager – User Guide" chapter: "Installation Prerequisites". (http://www.dellups.com/)
For UPS systems compatibility, please refer to the chapter "Compatibility List"
2.1.3. NETWORK ARCHITECTURE
All hardware elements must have an operational network configuration that allows them to dialog
freely with each other.
Make sure in particular that ESX firewall authorizes:
Connections on TCP port 4679 and 4680 to enable a remote access for supervision and
configuration through Web Browser. These ports are reserved at IANA
(http://www.iana.org).
Connections through TCP port 80. It must be opened as a destination port (for output) on the
machine hosting Dell UPS Local Node Manager.
To enable communication between Dell UPS Local Node Manager and Dell Network
Management Card):
esxcfg-firewall -o 4679,tcp, in,EATONhttp
esxcfg-firewall -o 4680,tcp, in,EATONhttps
esxcfg-firewall -o 80,tcp,out,http
esxcfg-firewall –o 5000,tcp,out,EATONinit
esxcfg-firewall –o 4679,udp, in,EATONhttpU
esxcfg-firewall –o 4680,udp, in,EATONhttpsU
To configure your VMWare ESX Server for the network, please refer to the user guide.
2.2. INSTALLATION OF DELL ULNM IN WMWARE ESX SERVER 4.0
Dell ULNM – User guide extension - VMWare ESX Server
VMware is a registered trademark of VMware, Inc.
rev0.01
USER'S GUIDE EXTENSION FOR VMWARE ESX 4.0 VIRTUAL ARCHITECTURE
Dell UPS Local Node Manager
Dellups.com
5