Dell Hardware Architecture - Dell PowerEdge UPS 500T User Manual

Select VIMA/vMA guest machine and click on edit button and configure as shown above

Startup Settings
o Click Use specified settings
o Startup delay – 120 Seconds

Shutdown Settings
o Click Use specified settings
o Shutdown delay – 120 seconds

For the automatic virtual machine boot of other guest machines on VMware ESXi start-up:
From the Virtual Infrastructure Client interface, go in the
"Virtual machine startup / shutdown" menu
and stop VMs with the system", and tick "enable."
Note: In the « Properties...» page, you also have the possibility to define the Startup Order of your
virtual Machines.

Start and Stop VMs with the system

Default Startup Delay

Default Shutdown Delay

Startup Order
This configuration is illustrated on the following screenshot:

2.1.3. DELL HARDWARE ARCHITECTURE

The prerequisites for Dell UPS Local Node Manager installation are described in the "Dell UPS Local
Node Manager – User Manual" chapter: "Installation Prerequisites". (http://www.dell.com/)
For UPS systems compatibility, please refer to the chapter "Compatibility List"
Dell ULNM - User guide xtension - VMware ESXi
VMware is a registered trademark of VMware, Inc.
rev0.02
USER'S GUIDE EXTENSION FOR VMWARE ESXi VIRTUAL ARCHITECTURE

"Configuration"
: Enabled
: x Seconds
: x Seconds
: Automatic Startup
Dell UPS Local Node Manager

"Properties"
Dellups.com

"Start
6