Power Supplies; Environmental Parameters; Ac Power Requirements; Dc Power Requirements - Dell Force10 Z9000 Quick Start Manual

Environmental Parameters

Parameter
Temperature
Maximum altitude
Relative humidity

AC Power Requirements

Parameter
Nominal Input Voltage
Maximum AC Power Supply Input
Current
Maximum System Power Input

DC Power Requirements

Parameter
Nominal Input Voltage
Maximum Power Supply Input
Current
Maximum System Power Input

Power Supplies

The Z9000 is designed to support two hot-swappable power supplies.
NOTE: If using a single PSU, you must install a blank plate in the other PSU slot.
Dell Force10 recommends using PSU0, if installing only one power supply.
WARNING: To prevent electrical shock, make sure the Z9000 is grounded
properly. If you do not ground your equipment correctly, excessive emissions
may result. Use a qualified electrician to ensure that the power cables meet
your local electrical requirements.
WARNING: Electrostatic discharge (ESD) damage can occur if components
are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the Z9000 and its components.
Specifications
32° to 104°F (0° to 40°C)
-40° to 158°F (-20° to 70°C)
No performance degradation to 10,000 feet
(3,048 meters)
10 to 85% non-condensing
Specifications
100 to 240 VAC, 50/60 Hz
8.00 A @ 100/120VAC
4.00 A @ 200/240 VAC
789 W
Specifications
36 to 72 VDC
2.8A @ 36 VDC
1.85 A @ 72 VDC
360 W
Installing the Hardware
11