Changing The Settings In The Wired Lan Sheet - Canon PIXMA MX459 Online Manual

Changing the Settings in the Wired LAN Sheet

Note
This screen is not available depending on the printer you are using.
Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.
1. Start up IJ Network Tool.
Starting up IJ Network Tool
2. Select the printer in Printers:.
3. Select Configuration... from the Settings menu.
4. Click the Wired LAN tab.
The Wired LAN sheet is displayed.
For details on the Wired LAN sheet, see
5. Change the settings or confirm.
Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your
network environment.
6. Click OK.
After changing configuration, a screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click Yes, the settings are sent to the printer and the
Transmitted Settings screen is displayed.
Wired LAN Sheet.