About Quiet Setting - Canon PIXMA MX459 Online Manual

About Quiet setting

Enables this function on the machine if you want to reduce the operating noise, such as when printing at
night. In addition, you can specify the time range to reduce the operating noise.
Important
Set the current date and time in advance.
Setting the Sender Information
Follow the procedure below to perform setting.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Press the Setup button.
The Setup menu screen is displayed.
3. Use the button to select Quiet setting then press the OK button.
4. Use the button to select ON or Use in specified hrs, then press the OK
button.
• When ON is selected:
The LCD returns to the Setup menu screen.
• When Use in specified hrs is selected:
The screen to specify starting/ending time is displayed. Use the
under the desired position, then use the Numeric buttons to enter the time.
Press the OK button, then the LCD returns to the Setup menu.
Activate this setting to reduce the operating noise while printing is in progress.
Important
Operating speed may be reduced compared to when OFF is selected.
This function may not be so effective depending on the machine's setting. Furthermore, certain
noise, such as when the machine is preparing for printing, is not reduced.
Note
You can set the quiet mode from the operation panel of the machine, the printer driver, or
ScanGear (scanner driver). No matter how you use to set the quiet mode, the mode is applied
when you perform operations from the operation panel of the machine or printing and scanning
from the computer.
button to move the cursor