Printing Out Network Setting Information - Canon PIXMA MX459 Online Manual

Printing Out Network Setting Information

You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1. Make sure that the machine is turned on.
Confirming that the Power Is On
2. Load a sheet of A4 or Letter-sized plain paper.
Loading Paper
3. Press the Setup button.
The Setup menu screen is displayed.
4. Use the button to select Device settings, then press the OK button.
5. Use the button to select LAN settings, then press the OK button.
6. Use the button to select Print LAN details, then press the OK button.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Communication Mode
Channel
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IPv4 IP Address
IPv4 Default Gateway
Subnet Mask
IPv6 IP Address *1
IPv6 Default Gateway
*1
Subnet Prefix Length*1 Subnet Prefix Length
IPsec*2
Security Protocol*2
Wireless LAN DRX
Explanations of the item
Wireless LAN
Status of the Wireless LAN Active/Inactive
MAC Address
SSID
Communication Mode
Channel
Method of the Encryption
WEP Key Length
Method of the
Authentication
Signal Strength
TCP/IP Version
Selected IP Address (IPv4) XXX.XXX.XXX.XXX
Default Gateway (IPv4)
Subnet Mask
Selected IP Address (IPv6)
Default Gateway (IPv6)
IPsec setting
Method of the Security
Protocol
Discontinuous reception
(wireless LAN)
Setting
Enable/Disable
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN
Infrastructure
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/
WPA2-PSK
0 to 100 [%]
IPv4 & IPv6/IPv4
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXX
Active
ESP/ESP & AH/AH
Enable/Disable