When flashing is complete, WinFlash automatically restarts the system.
CAUTION:
Do not turn off the computer during the Flash process.
•
Do not put the system into standby or hibernation mode.
•
Do not launch other applications.
•
Winflash Error and Warning Messages
•
If the AC adapter is not plugged in before Winflash starts, the following message is
shown:
•
After executing Winflash, if the AC adapter is not plugged and the battery power is low,
the following message is shown:
•
Check the BIOS ROM file size. If the BIOS ROM file size is different from the ROM part
size, the following message is shown:
System Utilities
Figure 2-21. AC Detect Error Message
Figure 2-22. Battery Power Warning Message
Figure 2-23. BIOS ROM File Size Error Message
2-17