Dos Flash Utility - Acer Aspire S5-391 Service Manual

DOS Flash Utility

NOTE:
Plug the AC power adaptor to a power source before performing the DOS Flash Utility.
Perform the following to use the DOS Flash Utility:
Reboot the system and press F2 during boot to enter the BIOS Setup Utility.
1.
Select Boot menu to modify the boot priority order.
2.
Move the USB HDD to position 1 (refer to
3.
Information Main
Boot priority order:
1. HDD0 : Intel Aspire S5-391
2. HDD1 :
3. ATAPI CDROM :
4. USB FDD :
5. Network Boot :
6. USB HDD :
7. USB CDROM :
F1 Help
Esc Exit
Reboot the computer in DOS mode.
4.
At the command prompt, execute the "BIOS.BAT" batch file to update BIOS and EC.
5.
System Utilities
InsydeH20 Setup Utility
Security Boot
Select Item F5/F6
Select Menu Enter
Figure 2-12. Changing the BIOS Boot Priority Order
Figure 2-13. Execute DIR
Boot on page 2-10).
Exit
Change Values
Select Sub-Menu
Item Specific Help
Use < > or < > to select a
device, then press <F6> to move
it up the list, or <F5> to
move it down the list. Press
<Esc> to escape the menu
F9 Setup Defaults
F10 Save and Exit
Rev. 3.7
2-13