Servo Motor Troubleshooting
To calibrate the motor, perform the following:
Run as administrator
(see
Run Tool as Administrator
When to Use the Tool for Motor Calibration?
•
Either the Left Motor or Right Motor, or both, are removed
•
The Mainboard is removed
•
The Motor board is removed
Troubleshooting
Two selections to run Motor initialization
on page 4-15)
Motor calibration "PASS/FAIL"
Figure 4-10. Motor Calibration Flow
Left Side Motor
Mainboard
Figure 4-11. Requires Motor Calibration Tool
Run disable UAC
(see
Run Tool with Disabled UAC
Right Side Motor
Motor Board
on page 4-19)
4-14