Setting Up Calibration Link - Canon imagePROGRAF iPF6450 Manual

Large-format printers calibration link setup guide

Hide thumbs Also See for imagePROGRAF iPF6450:

Table of Contents

SETTING UP CALIBRATION LINK

Calibration link setup is performed after setting up the printer and spectrophotometer unit. Set up

the printer and spectrophotometer unit by following the setup guides included with the printer.

The following items are used for setting up calibration link.

・ The paper you want to match the colors on using color calibration

・ A printer with a spectrophotometer unit mounted (Calibration link does not need to be

performed if you are only using genuine Canon paper)

・ A printer that supports calibration link

・ Computer for managing paper (Only one computer is used for adding custom paper and

exporting custom media information files. Calibration link does not need to be performed if

you are only using genuine Canon paper.)

・ Computer for printing (There can be more than one of these computers, and one may be

used simultaneously as the computer for managing paper)

・ The "User Software CD-ROM" for each model of printer (used for installing MCT and the

printer driver)

Table of Contents

Do you have a question about the imagePROGRAF iPF6450 and is the answer not in the manual?

Imageprograf ipf9400s