Canon imagePROGRAF iPF6450 Manual page 27

3. Press the OK button.
The Set./Adj. Menu is displayed.
4. Press or
5. Press or
6. Press or
7. Press or
paper feed adjustment.
8. Once the paper feed adjustment has finished, on the Tab Selection screen of the printer
control panel, press
button.
9. Press or
10. Press or
11. Press or
calibration.
Note that although AutoAdjst(HiPrc) is also displayed for printers that have a
spectrophotometer unit mounted, you should select Auto Adjust.
If you are using multiple paper types for printing, execute paper feed adjustment and color
calibration for each paper type.
If you have multiple printers, perform steps 1 to 11 for each of the printers.
This completes setting up calibration link.
to select Adjust Printer, and then press the OK button.
to select Feed Priority, and then press the OK button.
to select Adj. Quality, and then press the OK button.
to select Auto(OtherPaper), and then press the OK button to execute the
or to select Settings/Adj. tab (
to select Adjust Printer, and then press the OK button.
to select Calibration, and then press the OK button.
to select Auto Adjust, and then press the OK button to execute color
27
) and then press the OK