Switching the screen image
Press the
configuration choices, independent of the number of connected display devices.
●
Computer only mode—Turns off the external display and displays the image
only on the computer display.
●
Duplicate mode—Clones the computer display onto an external display that
is connected to the external monitor port (VGA) on the computer.
●
Extend mode—Extends the desktop to all connected external displays along
with the computer display.
●
Projector only mode—Turns off the computer display and sets all connected
external displays to extended desktop.
NOTE:
AMD Catalyst™ Control Center.
Using the AMD Catalyst Control Center
To configure desktops and displays and to manage AMD Eyefinity, you must use
the AMD Catalyst Control Center.
To access the AMD Catalyst Control Center:
1.
Select Start > All Programs > Catalyst Control Center > CCC.
2.
Select Desktops and Displays.
NOTE:
refer to the software Help.
6
Chapter 1 Welcome
switch screen image
You can manage the video output and default output devices using the
For additional information on using the AMD Catalyst Control Center,
action key to open a dialog box that shows the 4