Protecting Images Frame Set All Reset All; Frame Set - FujiFilm FinePix F700 Owner's Manual

ERASING SINGLE ALL FRAMES
PLAYBACK MENU
１００−０００９ １００−０００９
ＦＲＡＭＥ ＦＲＡＭＥ
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
0 1 2 0
１００−０００９ １００−０００９
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＥＲＡＳＥ ＡＬＬ ＯＫ？ ＥＲＡＳＥ ＡＬＬ ＯＫ？
ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
If the " ", message appears, press the "MENU/OK" button again to erase the files.
N
To stop the procedure mid-way
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
62
FRAME
1 Press "d" or "c" to select the file to be erased.
2 Press the "MENU/OK" button to erase the
currently displayed file.
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
"BACK" button.
G
!
Protected frames cannot be erased. Unprotect the frames
before erasing them (➡P.63).
ALL FRAMES
Press the "MENU/OK" button erases all the files.
G
!
To cancel erasing of all the frames while it is still in progress,
press the "BACK" button.
G
!
Protected frames cannot be erased. Unprotect the frames
before erasing them (➡P.63).
N
Press the "BACK" button to stop erasing all the
frames. Some unprotected files will be left unerased.
G
!
Even if you stop the procedure immediately, some files will
be erased.

PROTECTING IMAGES FRAME SET ALL RESET ALL

PLAYBACK MENU
1
1 0
2 0
2
ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＦＲＡＭＥ ＦＲＡＭＥ
3
1 0 0 2
ＰＲＯＴＥＣＴ ＰＲＯＴＥＣＴ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＦＲＡＭＥ ＦＲＡＭＥ
１００−０００９ １００−０００９
ＦＲＡＭＥ ＦＲＡＭＥ
ＰＲＯＴＥＣＴ ＯＫ？ ＰＲＯＴＥＣＴ ＯＫ？
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 0 2 0
1 Set the Power switch to " ".
2 Press the "MENU/OK" button to display the
menu screen.
Protection is a setting that prevents images from
being accidentally erased. However, "FORMAT"
erases all images, regardless of a "PROTECT ALL"
setting (➡P.72).
Press "d" or "c" to select " " PROTECT.
RESET ALL
Removes the protection from all the files.
SET ALL
Protects all the files.
FRAME
Protects or unprotects only the selected file.
1 Press "a" or "b" to select "FRAME", "SET ALL"
or "RESET ALL".
2 Press "MENU/OK" button to confirm your
selection.

FRAME SET

1 Press "d" or "c" to select the file to be protected.
2 Press the "MENU/OK" button to protect the file
currently displayed.
To protect another file, repeat steps 1 and 2. To
finish protecting files, press the "BACK" button.
63