Explanation Of Terms - FujiFilm FinePix F700 Owner's Manual

Specifications
Input/Output Terminals
External connection terminals Special USB cable, special A/V cable, cradle connection
DC Input To connect the AC power Adapter AC-5VW
Power Supply and Others
Power supply Use one of the following
i Rechargeable Battery NP-40 or AC Power Adapter AC-5VW
Conditions for use Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Available shots/
time using the battery
(When fully charged) NP-40
The number of shots shown here is an approximate guide to the number of consecutive
shots that can be taken based on 50% flash usage at normal temperatures. However,
the actual number of available shots will vary depending on the ambient temperature
when the camera is used and the amount of charge in the battery. The number of
available shots will be lower in cold conditions.
108 mm × 54 mm × 28 mm/4.3 in. × 2.1 in. × 1.1 in.
Camera dimensions
(W × H × D)
(not including accessories and attachments)
Camera mass (weight) 170 g/6.0 oz. (not including accessories, battery, xD-Picture Card)
Weight for photography Approx. 190 g/6.7 oz. (including battery NP-40 and xD-Picture Card)
72.0 mm × 57.9 mm × 88.0 mm/2.8 in. × 2.3 in. × 3.4 in.
Cradle dimensions
(W × H × D)
(not including accessories and attachments)
Cradle mass weight Approx. 81 g/2.9 oz.
Accessories See P.7
Optional Accessories See P.91
✽ These specifications are subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this Owner's Manual.
✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology.
Even so, small bright points and anomalous colors (particularly around text) may appear on the
monitor. These are normal display characteristics and do not indicate a fault with the monitor. This
phenomenon will not appear on the recorded image.
✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric
fields, static electricity, line noise, etc.).
✽ Due to the nature of the lens, the edges of photographed images may appear distorted. This is
normal and does not indicate a fault.
100
Battery Type No. of Shots
LCD monitor ON Approx. 135
LCD monitor OFF Approx. 270

Explanation of Terms

AF/AE Lock:
On the FinePix F700, pressing the shutter button down half way locks the focus and exposure settings (AF and AE
lock). If you want to focus on a subject that is not centered in the frame or change the picture composition after the
exposure is set, you can obtain good results by changing the composition after the AF and AE settings are locked.
Auto Power Save Function:
If the camera is not used in any way for 30 seconds, this function switches features such as the LCD
monitor off (Sleep mode) to prevent battery depletion and the waste of power when the AC power adapter is
connected. If the camera is then left unused for a further period, the Auto Power Save function switches the camera
off. This period can be set to 2 minutes or 5 minutes on this camera.
h The Auto Power Off function does not operate in PC mode, during automatic playback, or if it is disabled during
setup.
DPOF:
Digital Print Order Format
DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows you to
specify which of the frames shot using a digital camera are to be printed and how many prints are made of each image.
EV:
A number that denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity
(speed) of the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness
of the subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by
adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the
EV decreases by 1.
Frame rate (fps):
The frame rate refers to the number of images (frames) that are photographed or played back per second. For
example, when 10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps.
JPEG:
Joint Photographics Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss
of quality in the decompressed (restored) image.
Motion JPEG:
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file
are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
PC Card:
A generic term for cards that meet the PC Card Standard.
PC Card Standard:
A standard for PC cards determined by the PCMCIA.
PCMCIA:
Personal Computer Memory Card International Association (US).
Smear:
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light
source, such as the sun or reflected sunlight, in the photography screen.
VGA/QVGA:
Graphics standards for PCs. Images are displayed at 640 × 480 and 320 × 240 pixels respectively.
WAVE:
A standard format used on Windows systems for saving audio data. WAVE files have the ".WAV" file extension and
the data can be saved in either compressed or uncompressed format. Uncompressed recording is used on this
camera.
WAVE files can be played back on a personal computer using the following software:
Windows : MediaPlayer
Macintosh: QuickTime Player
✽ QuickTime 3.0 or later
White Balance:
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand,
devices such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of
the ambient light around the subject. This adjustment is called matching the white balance. A function that
automatically matches the white balance is called an Automatic White Balance function.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for
optimal printing.
101