FujiFilm FinePix F700 Owner's Manual page 39

INSTALLATION ON A Windows PC
Do not connect the camera to your PC until the software installation is completed.
Install FinePixViewer as instructed in the Quick Start Manual.
1
N
Launching the Installer Manually
1 Double-click the "My Computer" icon.
✽ Windows XP users should click "My Computer" in the "Start" menu.
2 Right-click "FINEPIX" (CD-ROM drive) in the "My Computer" window and select "Open".
3 Double-click "SETUP" or "SETUP.exe" in the CD-ROM window.
✽ The way file names are displayed differs as described below depending on your computer settings.
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
N
Installing Other Applications
You may see messages for installing QuickTime, NetMeeting, ImageMixer VCD for FinePix and
WINASPI. Install these applications as directed by the on-screen instructions. The installation screens
for these applications are displayed as required.
After you restart your PC, install DirectX as directed by the on-screen instructions and then
2
restart your PC again. If the latest version of DirectX is already installed on your PC, this
installation is not performed.
After you restart your PC, the "Installation of the FinePixViewer has been completed" message
3
appears.
76
N
N
INSTALLATION ON A Mac OS 8.6 TO 9.2
Pre-installation Checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac Power Macintosh G3
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube or PowerBook G4
Operating System Mac OS 8.6 to 9.2
RAM 64 MB minimum
Minimum 256 MB when RAW FILE CONVERTER LE is used
Hard disk space Amount required for installation: 110 MB minimum
Amount required for operation: 300 MB minimum
(When FinePix CD Album Maker is used: 2 GB or better)
Minimum 1 GB when RAW FILE CONVERTER LE is used
800 × 600 pixels or better, 16-bit color or better
Display
✽4
Internet connection i To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
i Connection speed: 56k or better recommended
✽5
Sound functions Speakers and microphone
✽1 Models with a USB port as a standard feature
✽2 This software does not run correctly in the Mac OS X Classic environment.
✽3 Turn virtual memory on if necessary.
✽4 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
N N
NOTE
i Connect the camera directly to the Macintosh using the special USB cable. The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER
LE is used. If other applications will be used at the same time, allocate the additional amount required
for those applications also.
N N
Enable File Exchange
Check whether File Exchange is active.
To use an xD-Picture Card that is supported by the camera, the File Exchange utility supplied with
Mac OS must be running.
Switch on your Macintosh and start up Mac OS 8.6 to 9.2.
1
G
!
Do not connect the camera to your Macintosh until the software installation is completed.
Select the Extension Manager in the Control Panel and check that the File Exchange check box
2
is ticked. If not, click in the box so that an
When you load the enclosed CD-ROM into the CD-ROM drive, the "FinePix" window
3
automatically opens.
G
!
If the "FinePix" window does not open automatically, double-click the CD-ROM icon.
Double-click "Installer for MacOS8.6-9.x" to launch the Installer.
4
✽1 ✽1
, PowerBook G3 ,
✽2
✽3
appears and then restart your Macintosh.
77