Using Finepixviewer - FujiFilm FinePix F700 Owner's Manual

VIEWING IMAGES
Windows XP
The "Found New Hardware" help message
1
appears in the bottom-right corner of your
screen. This message will close when the
settings are completed. No action is required.
G
!
This step is not required for subsequent connections.
Specify the settings in the "AutoPlay" dialog box.
2
h When FinePixViewer is included in the list of actions to perform
Select "Viewing images using FinePixViewer" and then select the "Always do the
selected action" checkbox. (This checkbox may not be shown in some cases.)
Click the [OK] button to launch FinePixViewer.
h When FinePixViewer is not included in the list of actions to perform
Select "Take no action" and then select the "Always do the selected action" checkbox.
(This checkbox may not be shown in some cases.)
Click the [OK] button and launch FinePixViewer manually.
A new removable disk icon appears in the "My Computer" window.
3
N N
Regarding the Icons
The next time you connect the camera, the removable disk drive icon and name change to the
"FinePix" icon and name.
Proceed to "Using FinePixViewer" on page 88.
86
Disconnecting the Camera
1
Perform the steps shown below before you switch the camera off. This procedure differs
2
depending on the operating system software (or PC) you are using.
Windows 98/98 SE
No PC operation is needed.
Windows Me/2000 Professional/XP
1 Right-click the removable disk icon in the "My
Computer" window and select Eject. This step is
only required in Windows Me.
2 Left-click the Eject icon in the taskbar and eject
"USB Disk".
✽ Screen for Windows Me
3 The menu option shown below appears. Click on
this option.
✽ Screen for Windows Me
4 The "Eject hardware" dialog box appears. Click the [OK] button or the close button.
Macintosh
Drag the "Removable drive" icon on the desktop to
the Trash.
G
!
When you drag the icon to the Trash, "
on the camera's LCD monitor.
3
Camera
0 1 2 0
Socket
DC IN 5V
socket
1 Quit all applications (FinePixViewer etc.) that are
using the camera.
2 Check that the viewfinder lamp is lit green or that
the self-timer lamp is off (no data is being
exchanged with the computer).
2
For a DSC connection, proceed to step .
For a PC CAMERA connection, proceed to step
G
!
Even when "Copying" is no longer displayed on the computer,
the camera and the computer may still be exchanging data.
Always check that the viewfinder lamp is lit green or that the
self-timer lamp is off.
" appears
1 Switch the camera off.
2 Unplug the special USB cable from the camera.
3
.
87