Playback Menu; Erasing Single/All Frames; Protecting Images: Frame / Set All / Reset All - FujiFilm FinePix S7000 Owner's Manual

ERASING SINGLE/ALL FRAMES

PLAYBACK MENU

１ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９
Ｆ Ｒ Ｆ Ｒ ＡＭ ＡＭＥ
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
ＯＫ ＯＫ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ
0 1 2 0
１ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９
Ａ Ｌ Ｌ Ｆ Ｒ ＡＭ Ａ Ｌ Ｌ Ｆ Ｒ ＡＭＥ Ｓ Ｅ Ｓ
Ｅ Ｒ Ａ Ｓ Ｅ Ａ Ｌ Ｌ Ｏ Ｋ ？ Ｅ Ｒ Ａ Ｓ Ｅ Ａ Ｌ Ｌ Ｏ Ｋ ？
Ｉ Ｔ Ｉ Ｔ ＭＡ ＭＡＹ Ｔ Ａ Ｋ Ｅ Ａ Ｙ Ｔ Ａ Ｋ Ｅ Ａ ＷＨ Ｉ Ｌ Ｅ Ｈ Ｉ Ｌ Ｅ
ＯＫ ＯＫ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ
If the " ", message appears, press the "MENU/OK" button again to erase the
frames (files).
N
To stop the procedure mid-way
Ａ Ｌ Ｌ Ｆ Ｒ ＡＭ Ｅ Ｓ Ａ Ｌ Ｌ Ｆ Ｒ Ａ Ｌ Ｌ Ｆ Ｒ Ａ Ｌ Ｌ Ｆ Ｒ ＡＭ Ｅ Ｓ Ｍ Ｅ Ｓ Ｍ Ｅ Ｓ
BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ
72
FRAME
1 Press "d" or "c" to select the frame (file) to be
erased.
2 Press the "MENU/OK" button to erase the
currently displayed frame (file).
To erase another image, repeat steps 1 and 2.
When you have finished erasing images, press the
"BACK" button.
G
!
Pressing the "MENU/OK" button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
G
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.73).
ALL FRAMES
Pressing the "MENU/OK" button to erases all the
frames (files).
G
!
Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.73).
N
To cancel erasing of all the frames (files) while it is still
in progress, press the "BACK" button. Some
unprotected frames (files) will be left unerased.
G
!
Even if you stop the procedure immediately, some frames
(files) will be erased.

PROTECTING IMAGES: FRAME / SET ALL / RESET ALL

PLAYBACK MENU
1
1 0
2 0
2
Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ
Ｒ Ｅ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ
Ｓ Ｅ Ｔ Ａ Ｌ Ｌ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ
Ｆ Ｒ Ｆ Ｒ ＡＭ ＡＭＥ
3
0 1 0 2
Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ
Ｒ Ｅ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ Ｒ Ｅ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ
Ｓ Ｅ Ｔ Ａ Ｌ Ｌ Ｓ Ｅ Ｔ Ａ Ｌ Ｌ
Ｆ Ｒ Ｆ Ｒ ＡＭ ＡＭＥ
１ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９
Ｆ Ｒ Ｆ Ｒ ＡＭ ＡＭＥ
Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｏ Ｋ ？ Ｐ Ｒ Ｏ Ｔ Ｅ Ｃ Ｔ Ｏ Ｋ ？
ＯＫ ＯＫ Ｙ Ｅ Ｓ Ｙ Ｅ Ｓ BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ
1 0 2 0
1 Set the Power switch to " ".
2 Press the "MENU/OK" button to display the
menu screen.
Protection is a setting that prevents frames (files)
from being accidentally erased. However, the
"FORMAT" function erases all the frames (files),
including protected frames (files) (➡P.86).
Press "d" or "c" to select " " PROTECT.
RESET ALL
Removes the protection from all the frames (files).
SET ALL
Protects all the frames (files).
FRAME
Protects or unprotects only the selected frame (file).
1 Press "a" or "b" to select "FRAME", "SET ALL"
or "RESET ALL".
2 Press "MENU/OK" button to confirm your
selection.
FRAME SET
1 Press "d" or "c" to select the frame (file) to be
protected.
2 Press the "MENU/OK" button to protect the frame
(file) currently displayed.
To protect another frame (file), repeat steps 1 and
2. To finish protecting frames (files), press the
"BACK" button.
73