Playing A Disc; Basic Playback; General Features; Pause - Sharp DV-NC100 Operation Manual

PLAYING A DISC

Basic Playback

DVD CD
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the VCR/DVD.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
• When you play NTSC recorded discs, the default setting
converts this to a modified PAL (Refer to page 28 "Display
Setting").
1
Press OPERATE, then DVD.
2
Press OPEN/CLOSE to open disc
loading tray.
3
Place the chosen disc on the tray, with
the label facing up.
4
Press PLAY.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press PLAY.
• When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to "TITLE MENU".
5
Press STOP to stop playback.
NOTES:
• A "prohibited icon" may appear at the top-right
on the TV screen during operation, warning
that a prohibited operation has been encoun-
tered by the VCR/DVD or the disc.
• With DVDs that use some titles for playback pro-
gramme signals, playback may start from the second
title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• A DVD-RW disc recorded in the VR mode may freeze
momentarily during playback depending on how the
playlist was made and edited (deleted titles, repeated
recording).
MP3 DVD-RW VCD
VR mode
JPEG

General Features

DVDs or Video CDs may contain menus to navigate the disc
and access special features. Enter an appropriate number or
use Arrow ( K / L / s / B) to highlight your selection in the
DVD main menu and press ENTER to confirm.
NOTE:
• Unless stated, all operations described are based on
remote control use.
Cancelling PBC* (for playback of a Video CD)
1
Insert a Video CD. (Playback will start automatically.)
2
Press STOP.
3
Enter track number of your choice with the numerical
buttons.
4
PBC is now cancelled and the playback of the Video CD
will start.
*What is PBC?
"PBC" stands for the PlayBack Control. You can play interac-
tive software using a menu screens. Refer to instructions of
Video CD.

Pause

DVD CD
1
During playback, press STILL/PAUSE.
• Playback will pause and sound will be muted.
2
To continue playback, press PLAY.
NOTE:
• Set STILL MODE to FIELD on the Display menu if pic-
tures in the pause mode are blurred. (Refer to page 28.)

Disc Menus

1
Press MENU.
• The DVD main menu will appear.
2
If the feature is not available,
the TV screen.
3
If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other options
will appear for selection.
4
K
Press Arrow (
ENTER to confirm selection.
– 19 –
MP3 DVD-RW
VR mode
symbol may appear on
L
/ / s / B) to select an item, and
VCD
DVD
EN