Care And Cleaning - Sharp SJ-16V Operation Manual

CARE AND CLEANING

Some household cleaning chemicals may
affect the inside surfaces and plastic
shelves resulting in splitting or cracks oc-
curring.
When cleaning all plas-
tic parts inside this refrig-
erator, only use diluted
dishwashing liquid (soapy
water). Make sure that all
plastic parts are thor-
oughly rinsed with water
after cleaning.
1. Remove the shelves and pockets from the
cabinet and door. Wash them in warm soapy
dishwashing water; rinse in clean water and
dry.
2. Clean the inside with a cloth soaked in warm
soapy dishwashing water. Then, use cold wa-
ter to wipe off soapy water.
3. Wipe the exterior with a soft cloth each time it
is soiled.
4. Clean Magnetic door seal with a toothbrush
and warm soapy dishwashing water.
5. Whenever the refrigerator is moved to clean
or repositioned, the Evaporating pan should
be removed and cleaned.
NOTE:
• Do not use polishing powder, benzine, hot water
etc.
• If undiluted detergent is used or soapy water is
not wiped off thoroughly, cracking of plastic parts
can result.
• Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic sur-
face.
10
Evaporating pan;
How to remove
Move the Evaporating
pan to pull it toward
yourself.
How to set
1. Make sure the
back end of the
Evaporating pan
rests securely on
the claw. Other-
wise water will
leak.
2. Set the Evaporat-
ing pan so that
the two protru-
sions come
through its corre-
sponding holes.
Replacing method of the lamp bulb
1. Unplug the refrigerator first
to prevent electric shock.
2. Replace the lamp bulb with
the same type.
base E12, MAX 10W,
T-20
Switching off your refrigerator
If you switch your refrigerator off when you are
going away for an extended period, remove all
food, clean the interior thoroughly. Remove the
power cord plug from the power socket and leave
all doors open.
Evaporating pan
Protrusion
Holes
Evaporating
pan
Claw
Holes
Lamp