• CARE AND CLEANING ..... 10 • WHAT TO DO BEFORE YOU CALL FOR SERVICE ........11 Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum...
• The refrigeration system behind and inside of the electrical insulation. the refrigerator contains refrigerant. Do not allow any sharp objects to come into contact 6. When cleaning any areas adjacent to electri- with the refrigeration system. cal components or replacing the lamp bulb, unplug the refrigerator first to prevent electric •...
SHARP as a special cord is required. 4. To prevent accidental power disconnection, 13. In case of gas leak, ventilate the area by open- plug the refrigerator directly to the source.
11. Light 2. Refrigerator temp. control knob 12. Door pocket 3. Freezer temp. control knob 13. Bottle pocket 4. Free case (Only for SJ-16V) 14. Slide case 5. Shelf (Only for SJ-18V) 15. Ice cube tray 6. Fresh case (Only for SJ-18V) 16.
INSTALLATION 1. To ensure adequate ventilation for your refrig- erator, it is recommended to provide space of 30cm 6cm on both sides and at the back, and space of 9cm above the refrigerator. Insufficient spac- ing will decrease the cooling efficiency, result- ing in unnecessary consumption of electricity.
HOW TO REVERSE THE REFRIGERATOR COMPARTMENT DOOR The refrigerator compartment door can be Preparation changed to a left-opening door. (1) Disconnect the power plug from the wall Prepare a slotted screwdriver. socket. (2) Remove all door pockets. 2,9 3 With the refrigerator compartment door open, remove the cover.
Page 7
Reverse the bearing and hole cover of Close the refrigerator compartment the door. door, align the holes, and insert the shaft (upper). • Remove the hole cover by inserting a slotted screwdriver into the recess shown in the draw- • If the refrigerator compartment door is in a ing, and pushing it down.
OPERATION CONTROLLING TEMPERATURES NOTE: The refrigerator controls its temperature automatically. How- ever, if needed, adjust the temperature as follows. • For hot summer conditions (about over 35°C ambient temperature), set your Refrigerator compartment FREEZER TEMP. CONTROL to less REFRIGERATOR TEMP. colder setting towards .
HINTS WHEN MAKING ICE 1. Do not over fill the Ice cube tray; other- wise the ice cubes will be joined to- gether when frozen. 2. When the ice cubes are made, hold the Ice cube tray upside down whilst twist- ing either end in opposite directions, al- Water level lowing the ice cubes to drop out.
CARE AND CLEANING Evaporating pan; Evaporating pan Some household cleaning chemicals may How to remove affect the inside surfaces and plastic shelves resulting in splitting or cracks oc- Move the Evaporating curring. pan to pull it toward yourself. When cleaning all plas- tic parts inside this refrig- erator, only use diluted How to set...
--- Operating sound produced immedi- Refer to your nearest service agent approved by ately after automatic defrost operation. SHARP. • Sound of flowing fluid (gurgling sound, fizzing sound) --- Sound of refrigerant flowing in pipes (sound may become louder from time to time).
Page 12
SHARP CORPORATION Printed in China TINS-A701CBRZ 06EK CN...