Setting The Decoder; Setting The Child Lock - Sharp PZ-43HV2E Operation Manual

Basic adjustment settings
MENU
Decoder menu
Programme Setup "Manual"
01 SAT.1
02 PRO7
03 KABEL
Programme Setup "Manual"
01 SAT.1
02 PRO7
03 KABEL
34
ENTER
/
Decoder
Off
INPUT1
INPUT2
INPUT3
Lock menu
Lock
Off
On

Setting the decoder

When connecting a decoder to the unit, you need
assign the terminal input.
On Programme Setup "Manual" menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select "Decoder", and then press
ENTER.
• Terminal inputs information displays.
3
Press a/b to select an INPUT terminal, and then
press ENTER.
A
• "Off" is factory preset value.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
/ /

Setting the child lock

You can block the viewing of any channel.
On Programme Setup "Manual" menu
1
Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select "Lock", and then press
ENTER.
• Child lock menu displays.
3
Press a/b to set "Lock" to "On", and then press
ENTER.
A
• Even when this function is switched "On", it will not work if
a password has not been set. See page 58 for details on
password setting.
• When "Lock" is set to "On" for a channel, "CHILD LOCK
HAS BEEN ACTIVATED." displays , and the image and
sound of the channel is blocked.
• When pressing ENTER while "CHILD LOCK HAS BEEN
ACTIVATED." displays, password input menu will display.
Inputting the correct password lifts the child lock
temporarily until the power is turned off.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.