Playback
Inserting a Video Cassette
Gently insert the video cassette into the cassette compartment. The VCR turns on automatically and POWER
LED indicator light up. If the cassette is inserted incorrectly, the loading system will not function. Do not force
the cassette into the VCR.
To remove the cassette, press EJECT during stop mode.
Playback
• Turn on the TV and select the video channel. (See Setting the 3
(VC-H960U)
EJECT
POWER
! Press POWER to turn on the VCR. The POWER LED indicator light up.
@ Insert a cassette.
# Press PLAY. (The automatic tracking control system engages and "PLAY" flashes on the TV screen for a
few seconds. See Automatic Tracking Control System.) VCR LED indicator will light up.
$ To stop playback, press STOP. (If the tape reaches its end, the VCR will automatically rewinds the tape to
the beginning, turns its power off and ejects the tape.)
• If noise should remain on the TV screen after tracking adjustment has been completed by the Automatic Tracking Control
System, use the manual tracking mode.
• Press CH ∂/ƒ during playback mode to change to manual tracking mode. Adjust the tracking using CH ∂ /ƒ until the
noise is minimized or eliminated.
• For tapes recorded in EP on another VCR that still have vertical jitter even after manual adjustment, hold down PLAY for
about 2 seconds. (On screen display may be blurred.) Ejecting the tape or turning off the power will return playback to its
normal mode.
Notes for S-VHS tape
• Playback of S-VHS recorded tapes is possible.
• Playback of S-VHS image quality is not available.
• Picture noise or distortion may appear on the screen during playback in the SLOW or STILL mode.
• S-VHS recording is not available. However, HQ recording is possible with S-VHS tape.
4 Output Channel.)
EJECT
POWER
PLAY
STOP
STOP
PLAY
23