Remote Control; Inserting The Batteries - Sharp VC-A560U Operation Manual

Remote Control

TV/VCR buttons (p. 17)
PLAY button (p. 23)
POWER button (p. 17)
REW button (p. 24)
STOP button (p. 23)
REC button (p. 26)
Numbered buttons (p. 19)
100/AM/PM button (p. 19)
SLOW button (p. 24)
j/k buttons (SLOW j/k,
DPSS j/k) (p. 34)
MENU button (p. 15)
SET button (p. 17)
CANCEL button (p. 32)

Inserting the Batteries

Make sure that the batteries have been properly installed first. Fit two batteries
type "AA". If the remote control stops working, fit new batteries.
Ensure the batteries are fitted correctly, matching the polarities (j/k) indicated
in the remote control.
• Do not subject the remote control to shock, water or excessive humidity.
• The remote control may not function if the VCR sensor is in direct sunlight or any other
strong light.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix brands in use.
• Remove the batteries if the remote control will not be operated for an extended period of time.
• If the remote control does not function properly when new batteries are installed, remove the batteries and keep pressing
any button for 10 seconds before re-installing them.
8
EJECT button (p. 23)
FF button (p. 24)
TAMPER PROOF button (p. 35)
CH (CHANNEL) ∂/ƒ
buttons (p. 29)
PAUSE/STILL button (p. 24)
INPUT button (p. 28)
SKIP SEARCH button (p. 34)
REPLAY button (p. 34)
ZERO BACK button (p. 33)
TAPE SPEED button (p. 26)
ON SCREEN button (p. 15)
∂/ƒ/ß / © button (p. 17)
PROG. (PROGRAMME) button (p. 30)