TINS-A083UMZZEnglish.book Page 33 Monday, November 11, 2002 9:39 AM
MORE INFORMATION ABOUT YOUR VCR
ON-SCREEN DISPLAY
All the information you need on the VCR status will be summarised on the on-screen display.
If you are recording, playing back a tape or watching a broadcast on the video channel you
can call up three standard on-screen displays. The display can be selected by pressing the
MODE OSD
button on the remote control, 1,2,3 or 4 times.
1.
AUTO
, the current mode and channel
number will be displayed for 3 seconds when an
operation or number button is pressed.
2.
FULL
., all the active features will also be shown
on screen.
Programme number and channel
Tape Status
Audio output mode
Tape speed
Tape remaining
Time
Date
Tape counter
3.
COUNTER
, this display will show the tape
counter and amount of tape remaining.
4.
DISPLAY OFF
from the screen.
NOTES:
•
The default time and date will not be displayed if the clock has not been set.
•
The VCR will return to display
•
If you are recording from this VCR to another, make sure you remove the display from
the screen otherwise it will be recorded.
, this will remove the display
1
. each time it is switched on.
GB-33
1.
I
S P
2.
I
S U P E R P .
ON
S P
2 2 : 0 0
R EM 1 : 0 5
9 / 0 7
0 2
3.
REM 1:05
1 CH 5 9
S T E R EO
L R
1 CH 5 9
S T E R EO
L R
0 : 0 0 . 0 0
0:00.00