Installation; Operation - Sharp SJ-19T-H2 Operation Manual

Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION

1.To ensure adequate ventilation for your refrigerator, it is
recommended to provide space of 6 cm on both sides and
at the back, and space of 30 cm above the refrigerator.
Insufficient spacing will decrease the cooling efficiency,
resulting in unnecessary consumption of electricity.
6cm
6cm
96 cm

OPERATION

CONTROLLING TEMPERATURES
The refrigerator controls its temperature automatically.
However, if needed, adjust the temperature as follows.
MIN
KNOB
SETTING
OFF
Stop the operation of the
compressor.
When storing a small quantity
MIN
of food and the door is not
opened frequently.
For use in cold season when
the out door temperature is
WARM
comparatively low.
For normal operation.
NORMAL
When storing a large quantity
of food and the door is opened
frequently.
Use in hot seasons.
COLD
When cooling the food quickly
or making ice quickly.
When not required, be sure to
MAX
return the knob to the original
position, otherwise all food
may be frozen.
NOTE:
• The knob cannot be turned beyond-MAX position and
should not be forced beyond this mark.
• When the knob is set at the WARM dew drops may be
formed.
30cm
Adjustable
foot
6cm
MAX
OFF
PURPOSE
2.Using the front Adjustable foot, ensure that the refrigera-
tor is positioned firmly and level on the floor.
3.In order to prevent possible electric
shock, install the grounding wire to the
earth wire connecting screw at the rear
of the refrigerator. (2 pin plug region)
NOTE:
• Keep your refrigerator out of direct sunlight.
• Do not place next to heat generating appliance.
• Do not place directly on the ground. Provide suitable stand.
DEFROSTING
The freezer compartment is required
defrosting operation. When frost
formed with the thickness of 5mm (as
thick as the defrost indicator), the
freezer compartment is required de-
frosting operation.
And water is discharged in the evapo-
rating pan provided above the com-
pressor, and evaporated by the com-
pressor heat.
1
PROCEDURE
1
Remove the ice cube tray and food from the freezer
compartment.
2
Push the defrosting button.
It is recommended to push the defrosting button be-
fore going to bed in order to complete the defrosting
overnight. When 5mm-thick frost builds on the evapo-
rator, defrosting would be complete in about 3-4 hours
(during summer). After completion of defrosting, cool-
ing operation starts automatically.
MIN
OFF
2
WHEN STOPPING DEFROSTING OPERATION
Turn the control knob to OFF position, and set the con-
trol knob to original position (example: Normal) to start
cooling operation.
NOTE:
1
Be sure to refrain from taking off the frost sticking to
the evaporator by using a gimlet or a knife.
2
If the thickness overs the defrost
indicator, defrosted water may
overflow the evaporating pan.
Pay due attention to this regard.
3
Be careful not to defrost when frozen food is stored
in the freezer compartment, otherwise it will thaw.
Therefore, it is recommended to perform defrosting
when no frozen food is stored.
Screw
Defrost indicator
Defrosting button
Push
MAX
Defrost indicator
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sj-22t-h2Sj-14t-h2

Table of Contents