Installing The Print Heads And Ink Tanks - Sharp AJ-2100 Operation Manual

INSTALLING THE PRINT HEADS AND INK TANKS

Follow the steps below for installation.
This section describes how to install the print heads and ink tanks when you install
them for the first time after purchasing this printer. Refer to "Changing the Ink
Tank" or "Changing the Print Head" in your online manual when you change ink
tank or print head after installing.
Installing the Print Heads
Make sure that the power lamp is lit, and the ink lamp is blinking
1
rapidly.
If the power lamp is not lit, press the power button.
Open the front cover.
2
Do not try to move the carriage manually by force.
Raise the print head latch.
3
Raise the latch until it comes in contact with the front cover.
12